10003, Manhattan, EAST 1 STREET, 72
American
Workplace SFAA policy not prominently posted in workplace
Non-food contact surface improperly constructed. Unacceptable material used. Non-food contact surface or equipment improperly maintained and/or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
Mechanical or natural ventilation system not provided, improperly installed, in disrepair and/or fails to prevent excessive build-up of grease, heat, steam condensation vapors, odors, smoke, and fumes.
Proper sanitization not provided for utensil ware washing operation.
Food Protection Certificate not held by supervisor of food operations.
Accurate thermometer not provided in refrigerated or hot holding equipment.
Non-food contact surface improperly constructed. Unacceptable material used. Non-food contact surface or equipment improperly maintained and/or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
Food not cooled by an approved method whereby the internal product temperature is reduced from 140º F to 70º F or less within 2 hours, and from 70º F to 41º F or less within 4 additional hours.
Proper sanitization not provided for utensil ware washing operation.
Wiping cloths soiled or not stored in sanitizing solution.
Food worker does not use proper utensil to eliminate bare hand contact with food that will not receive adequate additional heat treatment.
Filth flies or food/refuse/sewage-associated (FRSA) flies present in facility’s food and/or non-food areas. Filth flies include house flies, little house flies, blow flies, bottle flies and flesh flies. Food/refuse/sewage-associated flies include fruit flies, drain flies and Phorid flies.
Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.
Food not protected from potential source of contamination during storage, preparation, transportation, display or service.
Evidence of mice or live mice present in facility's food and/or non-food areas.
Facility not vermin proof. Harborage or conditions conducive to attracting vermin to the premises and/or allowing vermin to exist.
Proper sanitization not provided for utensil ware washing operation.
Non-food contact surface improperly constructed. Unacceptable material used. Non-food contact surface or equipment improperly maintained and/or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
Food not protected from potential source of contamination during storage, preparation, transportation, display or service.