Appropriately scaled metal stem-type thermometer or thermocouple not provided or used to evaluate temperatures of potentially hazardous foods during cooking, cooling, reheating and holding.

Food not cooled by an approved method whereby the internal product temperature is reduced from 140º F to 70º F or less within 2 hours, and from 70º F to 41º F or less within 4 additional hours.

Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.

Thawing procedures improper.

Non-food contact surface improperly constructed. Unacceptable material used. Non-food contact surface or equipment improperly maintained and/or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.

Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.

Facility not vermin proof. Harborage or conditions conducive to attracting vermin to the premises and/or allowing vermin to exist.

Filth flies or food/refuse/sewage-associated (FRSA) flies present in facility’s food and/or non-food areas. Filth flies include house flies, little house flies, blow flies, bottle flies and flesh flies. Food/refuse/sewage-associated flies include fruit flies, drain flies and Phorid flies.

Plumbing not properly installed or maintained; anti-siphonage or backflow prevention device not provided where required; equipment or floor not properly drained; sewage disposal system in disrepair or not functioning properly.

Nuisance created or allowed to exist. Facility not free from unsafe, hazardous, offensive or annoying conditions.

Evidence of mice or live mice present in facility's food and/or non-food areas.

Food not protected from potential source of contamination during storage, preparation, transportation, display or service.

Thawing procedures improper.

Workplace SFAA policy not prominently posted in workplace

Food not cooled by an approved method whereby the internal product temperature is reduced from 140º F to 70º F or less within 2 hours, and from 70º F to 41º F or less within 4 additional hours.